| AUTO DIAL |
| |
To Program: without lifting handset, press auto dial key. Dial number to
be stored and press auto dial key again.
To Use: lift handset, press auto dial and stored number will be dialed. |
| CALL FORWARD |
| |
To Activate: without lifting handset, press forward key and dial number
where calls are to be forwarded. Press forward key again.
To Cancel: press forward key |
| CALL PARK (NO DISPLAY) |
| |
To Park: with a call on the line, press park twice. The call is parked
on your extension number.
To Retrieve: lift handset, dial *6 plus the extension call was parked from
and say "hello". |
| CALL PARK ( NO PARK KEY) |
| |
To Park: with call on the line, press transfer. Dial *5 and press transfer
again. Call is parked against your extension number.
To Retrieve: lift handset, dial *6 plus the extension call was parked from
and say "hello". |
| CALL PARK (WITH DISPLAY) |
| |
To Park: with a call on the line, press park. Read the number in your
display. Press park again. Call is parked on that number.
To Retrieve: lift handset, dial 4 digit call park number and say "hello". |
| CALL PICK-UP |
| |
To Respond: lift handset and press pick-up key or dial *7. |
| CONFERENCE |
| |
To Activate: press conference key. Dial number. Announce conference.
Press conference key again. Repeat procedure to connect up to six parties. |
| DIAL INTERCOM |
| |
To Call: lift handset and press INTERCOM KEY key. Dial 1 or 2 digit
member number. Hear either one ring and connection or hear ringing until intercom is
manually answered.
To Answer (Ringing): lift handset and press INTERCOM KEY key, or with 2616
sets only, press INTERCOM KEY key. You are on speakerphone.
To Answer (Voice): INTERCOM KEY key will ring once then answer automatically.
If you have a 2616 set with hands-free capability, you will be on speakerphone. With an
M2006 or M2008 set you will be able to hear the caller, but you must lift the handset in
order to speak to that party. |
| DN PICK-UP |
| |
To Respond: lift handset and press *8, then dial extension number of
ringing phone. |
| FUNCTION KEYS |
| |
Note: In addition to your extension number(s), you can have features assigned
to the telephone function keys on your telephone. You can have any combination of
extensions and features assigned to function keys (but only one extension on the M2006).
An LCD indicator shows the status of the feature assigned to each key. |
| HANDS FREE/MUTE |
| |
To Use: press hands free key and set is in speaker phone mode.
To Deactivate: lift handset to turn off speaker phone. Caller is still on the line.
Press Rls key to end to call.
To Reactivate: press hands free key. Place handset back in cradle. Call is
in speaker phone mode.
To Mute: press hands free key. LCD indicator flashes. Microphone is turned
off while speaker is still on.
To Un-mute: press hands free key. LCD indicator shows solid arrow. Both
microphone and speaker are on. |
| HOLD |
| |
To Activate: place an active call on hold by pressing the hold key.
To Deactivate: return to the caller by pressing the extension key beside the falt
flashing indicator. |
| LAST NUMBER REDIAL |
| |
To Use: lift the handset and press the extension key once. Number is dialed, or
without lifting handset, press extension key twice. |
| MAIN EXTENSION NUMBER |
| |
Note: Your main extension number (also known as your primary directory number)
is assigned to the lower right-hand key on your phone. When you pick up the handset, your
main extension is automatically activated, ready for you to make a call. To activate other
extensions (directory numbers or DNs), press their associated keys. The M2006 can have
only one extension number. |
| ON-HOOK DIALING |
| |
To Use: to dial a number without lifting the handset, press a free extension
key (hear the dial tone). Dial the number. Pick up the handset when the number starts
ringing (if busy, press Rls). |
| RELEASE
|
| |
To Use: disconnect a call on any active extension by hanging up the handset or
by pressing the orange release (Rls) key. Rls is especially useful for
disconnecting handsfree calls. |
| SPEED CALL |
| |
To Program: without lifting handset, press speed call key. Dial 1 digit
Speed Call Access Code (0-9). Dial number to be stored and press speed call
key
again. To Use: lift handset and press speed call key again. |
| SYSTEM SPEED CALL |
| |
To Use: lift handset and press system speed call key or dial *2.
Dial 2 digit System Speed Call Access Code and number is dialed. |
| TRANSFER |
| |
To Activate: press transfer key. Dial number. Press transfer key
again. |
| VOLUME CONTROL |
| |
To Use: adjust the volume on your set using the volume control keys
(arrows under number keypad.) Raise the volume by tapping the right side and lower the
volume by tapping the left side. You can adjust the volume of the handset, headset,
handsfree or buzz. You can adjust the volume while the phone is ringing. |
